Best picks

Best 20 Foot Extension Ladders: Top 9 Picks (November 2026)

Updated on · By the Yellow Cal team

The best 20 foot extension ladders include the Louisville 24 ft Fiberglass Extension Ladder for two-story roof and gutter work, the Soctone Ladder for indoor and outdoor multi-position jobs, and the DeWalt 16-foot Fiberglass Extension Ladder for electrical and utility jobs.

On this page (9 sections)
  1. The best 20 foot extension ladders for home and trade work
  2. How these 20 foot extension ladders compare
  3. How we compared these ladders
  4. What working height does a 20 foot extension ladder give you?
  5. Which material suits a 20 foot extension ladder?
  6. How do you set up a 20 foot extension ladder safely?
  7. Are telescoping and multi-position ladders as safe as a fixed extension?
  8. What else should you check before buying?
  9. Verdict: which 20 foot extension ladder should you buy?

The best 20 foot extension ladder for most homeowners is the Louisville 24 ft Fiberglass Extension Ladder, which gives enough reach for two-story roofs and gutters with a 300 lb Type IA rating and non-conductive fiberglass rails. Pick the Louisville Ladder 20 ft if you mainly work at eave height, the Little Giant HyperLite 24' if you carry your ladder all day, or a telescoping model if storage is your real limit.

A 20 foot extension ladder only puts you about 17 ft up once the fly section is overlapped. That matters when you size your ladder against your actual wall height, not the number on the box.

Our guide to what size ladder for a 12 foot ceiling covers reach math from the inside of the house. If your tallest work is a single story, an 8 foot step ladder may cover the whole job without the extension setup.

Our picks at a glance

  1. 1 Louisville 24 ft Fiberglass Extension Ladder
    Best for two-story roof and gutter work

    Louisville 24 ft Fiberglass Extension Ladder

    9.7/10 our score

    See it on Amazon
  2. 2 Soctone Ladder
    Best for indoor and outdoor multi-position jobs

    Soctone Ladder

    9.7/10 our score

    See it on Amazon
  3. 3 DeWalt 16-foot Fiberglass Extension Ladder
    Best for electrical and utility jobs

    DeWalt 16-foot Fiberglass Extension Ladder

    9.6/10 our score

    See it on Amazon
  1. 4Bryner Step Folding Ladder 19.6ft Multi-Purpose AluminiumCheck it
  2. 5Louisville Ladder 20 ft Fiberglass Extension

    Louisville Ladder 20 ft Fiberglass Extension

    Best for gutter and eave height jobs
    Check it
  3. 6Little Giant HyperLite 24'

    Little Giant HyperLite 24'

    Best for all-day work at height
    Check it
  4. 7LEVELEVE 20FT Extension Ladder

    LEVELEVE 20FT Extension Ladder

    Best for stairs and uneven ground
    Check it
  5. 8UC UP CLIMBER Telescoping Ladder

    UC UP CLIMBER Telescoping Ladder

    Best for RV and van roof access
    Check it
  6. 9Treemoo Telescoping Ladder 20FT

    Treemoo Telescoping Ladder 20FT

    Best for storage in a closet or trunk
    Check it

The best 20 foot extension ladders for home and trade work

Louisville takes the top spot for all-round roof and gutter work, while each other pick earns its place on reach, weight or storage. Match the ladder to the height you climb and how often you set it up.

1

Louisville 24 ft Fiberglass Extension Ladder: Best for two-story roof and gutter work

Louisville 24 ft Fiberglass Extension Ladder, 20 foot extension ladders
9.7/10Our score
  • Fiberglass rails, non-conductive
  • Type IA, 300 lb capacity
  • MAXLOCK rung lock and QuickLatch system
  • Steel swivel safety shoes

A 24 ft fiberglass extension that reaches most two-story roofs, with locks that keep the fly and base sections secure while you climb.

See it on Amazon

Pros

  • Non-conductive fiberglass rails
  • 300 lb Type IA capacity
  • Wide MAXLOCK rung lock and QuickLatch system

Cons

  • Heavier than a similar aluminum ladder
  • Longer closed length needs storage space

The Louisville 24 ft suits the homeowner who climbs to a second-story roof edge or cleans gutters twice a year. Its fiberglass rails are non-conductive, so you are not adding a metal body to a job near wiring or a metal gutter run.

The MAXLOCK rung lock and QuickLatch system hold both the fly and base sections firmly during extension. That reduces the loose wobble you get from cheaper locks when the ladder is fully raised.

The steel swivel safety shoes have metal shields and work with the tread down or in spike position. That gives you a stable base on a driveway or in soft ground at the same spot.

Its trade-off is weight. Fiberglass costs you more effort to carry than an aluminum ladder of the same reach, and 148 inches closed takes real storage room.

If you climb once a season, that weight is the price of a sturdier body.

Louisville 24 ft Fiberglass Extension LadderCheck it on Amazon
2

Soctone Ladder: Best for indoor and outdoor multi-position jobs

Soctone Ladder, 20 foot extension ladders
9.7/10Our score
  • A-frame and multi-position use
  • 330 lb capacity
  • Two stabilizer bars
  • Safety hinge lock and J-lock

An aluminum multi-position ladder that converts between A-frame and extension setups, with stabilizer bars for a wider base on uneven ground.

See it on Amazon

Pros

  • Converts between A-frame and extension use
  • 330 lb capacity
  • Stabilizer bars widen the base

Cons

  • 14 ft reach is short of a full two-story wall
  • Avoid fully extending every section

Soctone covers the jobs that sit between a step ladder and a full extension. It changes from an A-frame to a multi-position ladder, so you can set it up for indoor bulb changes, attic access and outdoor roof repairs without owning two ladders.

Two stabilizer bars give it a wider ground contact than a plain A-frame, which helps on gravel or a sloped path. The 330 lb capacity is generous for a multi-position model.

The safety hinge lock and solid J-lock keep the sections from sliding as you move around. The maker's own guidance is to avoid fully extending every section and to leave at least one double-layer step in place.

That guidance matters, because a fully stretched multi-position ladder flexes more than a fixed extension. Its 14 ft maximum reach also stops short of a full two-story wall.

Treat it as a versatile helper rather than your roof ladder.

Soctone LadderCheck it on Amazon
3

DeWalt 16-foot Fiberglass Extension Ladder: Best for electrical and utility jobs

DeWalt 16-foot Fiberglass Extension Ladder, 20 foot extension ladders
9.6/10Our score
  • Fiberglass rails, non-conductive
  • Type IA, 300 lb capacity
  • V-shaped non-marring top with tool slots
  • MAXLOCK rung lock and QuickLatch system

A shorter fiberglass extension with a V-shaped top that rests on poles and irregular walls and holds tools while you work.

See it on Amazon

Pros

  • Non-conductive fiberglass rails
  • V-shaped top with tool slots
  • 300 lb Type IA capacity

Cons

  • 16 ft reach suits single-story walls better than two-story roofs
  • Shorter working height than the 20 and 24 ft picks

DeWalt's 16 ft fiberglass extension is the electrical and utility pick. Non-conductive rails and a 300 lb Type IA rating suit panel work, light construction and any task where you would rather not lean metal against a wall near live circuits.

The V-shaped non-marring top is the practical difference. It rests on a pole or an uneven wall without sliding, and the tool slots and hardware tray keep a screwdriver or a handful of clips within reach while your hands are full.

MAXLOCK and QuickLatch are the same lock systems as the Louisville picks, so extension and locking feel familiar. D-shaped serrated rungs give your boots grip as you climb.

The trade-off is reach. At 16 ft it tops out around 13 ft of working height, which fits a single-story eave but not a second-story roof.

Buy it for electrical work and leave the long roof jobs to a 20 or 24 ft model.

DeWalt 16-foot Fiberglass Extension LadderCheck it on Amazon
4

Bryner Step Folding Ladder 19.6ft Multi-Purpose Aluminium: Best for storage in a small garage

Bryner Step Folding Ladder 19.6ft Multi-Purpose Aluminium, 20 foot extension ladders
9.4/10Our score
  • 7-in-1 configurations
  • 19.6 ft maximum height
  • 330 lb capacity
  • Folds to 4.9 ft

A folding multi-purpose ladder that reaches 19.6 ft but collapses to 4.9 ft for storage, with hardened steel joint locks.

See it on Amazon

Pros

  • Folds to 4.9 ft for compact storage
  • Seven configurations including A-frame and wall ladder
  • 330 lb capacity

Cons

  • More joints to set up than a plain extension ladder
  • Folding mechanism adds weight

The Bryner 7-in-1 is for the buyer whose garage, closet or truck bed cannot spare a long rail ladder. It extends to 19.6 ft for roof and ceiling work, then folds down to 4.9 ft tall for storage.

Its seven setups cover an A-frame, an extension ladder, a 90 degree ladder, a wall ladder and a scaffolding base. That range lets one ladder handle painting, cleaning and repairs instead of three separate tools.

Aviation-grade aluminum and double-reinforced tube corners support a 330 lb capacity. The hardened steel joint locks are built larger than typical ladder joints and lock with one click.

The trade-off against the fiberglass picks is stability near electricity and flex at full height. More joints mean more setup steps.

Lock every joint before you climb, and keep long trade work on a fixed extension ladder.

Bryner Step Folding Ladder 19.6ft Multi-Purpose AluminiumCheck it on Amazon
5

Louisville Ladder 20 ft Fiberglass Extension: Best for gutter and eave height jobs

Louisville Ladder 20 ft Fiberglass Extension, 20 foot extension ladders
9.2/10Our score
  • Fiberglass rails, non-conductive
  • Type IA, 300 lb capacity
  • ProTop with corner grip and work tray
  • MAXLOCK rung lock and QuickLatch system

A 20 ft fiberglass extension with a ProTop work tray and corner grip, aimed at gutter cleaning, painting and eave repairs.

See it on Amazon

Pros

  • ProTop work tray and corner grip
  • Non-conductive fiberglass rails
  • 300 lb Type IA capacity

Cons

  • 20 ft reach needs care to clear a full two-story roof
  • Heavier than aluminum options here

Louisville's 20 ft fiberglass model fits the common gutter job: the eaves of a two-story house or the edge of a tall single-story roof. The 20 ft length gives about 17 ft of working height once the sections overlap.

Its ProTop is the reason to choose it over a plain ladder top. The corner grip holds the ladder against a corner, the pole grip wraps a pole or downspout, and the work tray keeps a bucket or tools steady at the top.

The MAXLOCK rung lock and QuickLatch system are the same as on the 24 ft Louisville. Steel swivel shoes with metal shields keep the base stable on uneven ground.

Its trade-off is the roof edge. If your second-story eave sits near 18 ft or higher, the 24 ft Louisville clears it more comfortably.

Buy the 20 ft model for gutter cleaning and painting at eave level.

Louisville Ladder 20 ft Fiberglass ExtensionCheck it on Amazon
6

Little Giant HyperLite 24': Best for all-day work at height

Little Giant HyperLite 24', 20 foot extension ladders
9.1/10Our score
  • 20 percent lighter than comparable fiberglass ladders
  • Wide flat rungs
  • Built-in bubble level
  • Double-pulley system

A 24 ft fiberglass extension built to cut carrying and climbing strain, with flat rungs, a bubble level and a rope system that halves pull force.

See it on Amazon

Pros

  • Lighter than most fiberglass ladders its size
  • Wide flat rungs reduce foot fatigue
  • Built-in bubble level for setup

Cons

  • Premium price for the weight savings
  • Bubble level needs checking at the base before each climb

The Little Giant HyperLite 24' is for anyone who sets a ladder up several times a day. Little Giant says it weighs 20 percent less than other fiberglass ladders in its class, and the weight saving shows up in carrying and repositioning.

Its wide flat rungs are shaped for a full boot rather than a round bar that digs into your arch. On a long gutter or paint job, that matters more than most specs.

A built-in bubble level checks the base before every climb. Little Giant notes that 1 inch off at the base can mean a 9 inch lean at the top of a 19 ft ladder, so leveling early is worth the extra minute.

The double-pulley system halves the pull force and keeps the rope clear of your climb path. Riveted rungs can be replaced rather than forcing a new ladder after one damaged section.

The trade-off is the premium price you pay for the weight savings.

Little Giant HyperLite 24'Check it on Amazon
7

LEVELEVE 20FT Extension Ladder: Best for stairs and uneven ground

LEVELEVE 20FT Extension Ladder, 20 foot extension ladders
8.7/10Our score
  • 20 ft maximum height
  • Two anti-slip balance rods
  • Eight support points
  • Converts to A-frame, scaffold and right-angle ladder

A multi-position aluminum ladder with balance rods and eight ground contacts, which helps on stairs and sloped ground.

See it on Amazon

Pros

  • Eight support points for stability
  • Converts to A-frame and scaffold use
  • Balance rods with rollers for moving it

Cons

  • Multi-position setup takes longer than a fixed extension
  • Weighs 38 lb

LEVELEVE suits homes with steps, a sloped driveway or a deck edge where a standard extension ladder will not sit flat. Its two anti-slip balance rods and eight support points spread the load across uneven ground.

It reaches 20 ft and changes into a step ladder, A-frame, right-angle ladder or scaffold. That makes it useful for stairwell painting and reaching over a porch roof as well as for ordinary wall work.

The 2mm tube is thicker than many aluminum ladders, and the W-shaped non-slip steps give your boots a defined place to land. Rollers on the support rods help you move it without lifting the whole frame.

The trade-off is setup time. A multi-position ladder takes longer to configure than a simple extension, and 38 lb is more to carry than the telescoping options.

Buy it when stability on uneven ground is the priority.

LEVELEVE 20FT Extension LadderCheck it on Amazon
8

UC UP CLIMBER Telescoping Ladder: Best for RV and van roof access

UC UP CLIMBER Telescoping Ladder, 20 foot extension ladders
8.5/10Our score
  • 20.5 ft maximum height
  • 330 lb capacity
  • Detachable double hooks
  • Weighs 15 lb

A lightweight aluminum telescoping ladder that collapses small enough to keep in an RV or trunk, with top hooks for corner grip.

See it on Amazon

Pros

  • 15 lb and easy to carry
  • Top hooks grip corners
  • 330 lb capacity

Cons

  • Telescoping sections need careful locking at each rung
  • Less rigid than a fiberglass extension ladder

The UC UP CLIMBER is the RV and van pick. At 20.5 ft extended and about 15 lb, it stores in a compartment or trunk and still reaches a camper roof or a high garage shelf.

Its double hook design sets it apart from plain telescoping ladders. The two detachable hooks grab the corner of a roof or a rack, and you can turn them toward you for indoor use.

All-aluminum construction resists rust, which matters if the ladder lives outside or in a damp bay. The overlapping leg section adds thickness for support at full extension.

The trade-off is rigidity. A telescoping ladder flexes more than a rail extension ladder, and every rung needs its locks checked as you raise it.

Keep it for occasional roof access and light repairs, not daily trade work.

UC UP CLIMBER Telescoping LadderCheck it on Amazon
9

Treemoo Telescoping Ladder 20FT: Best for storage in a closet or trunk

Treemoo Telescoping Ladder 20FT, 20 foot extension ladders
8.2/10Our score
  • 20 ft maximum height
  • 330 lb capacity
  • Folds to 42 in
  • Non-slip strips on each step

A compact telescoping ladder that folds to 42 in and stores behind a door or in a car trunk, with anti-slip pads at the feet.

See it on Amazon

Pros

  • Folds to 42 in for tight storage
  • Non-slip strips on every step
  • 330 lb capacity

Cons

  • Needs both side locks engaged at each rung
  • Best kept to light jobs rather than daily trade use

Treemoo's 20 ft telescoping ladder is the storage-first pick. It folds from 20 ft to 42 in and stores behind a door, under a bed or in a car trunk.

Each step has a non-slip strip and the feet have anti-slip pads. The aluminum alloy resists wear and rust, and Treemoo says the ladder meets the EN131 safety standard.

Extension is simple: pull a rung up until it clicks, then confirm both the left and right locks are in place. Retraction takes two hands, opening one side then the other before lowering the rung slowly.

The trade-off is the same as any telescoping model: more moving parts to check and less stiffness at full height. It is a good fit for a loft, attic or roof hatch at home.

For repeated two-story work, a fixed extension ladder is the sturdier choice.

Treemoo Telescoping Ladder 20FTCheck it on Amazon

How these 20 foot extension ladders compare

The table lines up reach, capacity and material so you can see at a glance which ladder clears your wall height. Scores weigh specs, features and fit with what a homeowner buying a 20 foot extension ladder actually needs.

ProductBest forHeightCapacityMaterialOur score
Louisville 24 ft Fiberglass Extension Laddertwo-story roof and gutter work24 ft extended300 lbFiberglass9.7
Soctone Ladderindoor and outdoor multi-position jobs14 ft330 lbAluminum9.7
DeWalt 16-foot Fiberglass Extension Ladderelectrical and utility jobs16 ft300 lbFiberglass9.6
Bryner Step Folding Ladder 19.6ft Multi-Purpose Aluminiumstorage in a small garage19.6 ft330 lbAluminum9.4
Louisville Ladder 20 ft Fiberglass Extensiongutter and eave height jobs20 ft300 lbFiberglass9.2
Little Giant HyperLite 24'all-day work at height24 ft300 lbFiberglass9.1
LEVELEVE 20FT Extension Ladderstairs and uneven ground20 ft350 lbAluminum8.7
UC UP CLIMBER Telescoping LadderRV and van roof access20.5 ft330 lbAluminum8.5
Treemoo Telescoping Ladder 20FTstorage in a closet or trunk20 ft330 lbAluminum8.2

How we compared these ladders

We compared these ladders on rated reach, load capacity, rail material, lock and setup systems and how much storage each one needs. Our score weighs specs, features and fit against what you are shopping for: safe access to a roof or gutter at roughly 20 ft.

Reach came first. A ladder's stated length is not its working height, so we ranked by the height you can actually stand at after the fly overlap.

Models that clear a two-story eave scored higher than those built for a single story.

Next came stability and safety hardware. Fiberglass rails, Type IA ratings, swivel safety shoes and wide rung locks all count.

For electrical and utility work, non-conductive fiberglass moves a ladder up the list.

Finally, we weighed daily practicality. Weight, closed length and storage size decide whether you will actually haul the ladder out for a job.

That is why a lighter 24 ft fiberglass model and a folding multi-purpose ladder both earn high scores.

What working height does a 20 foot extension ladder give you?

A 20 foot extension ladder gives you about 17 ft of working height once the fly section is overlapped. Plan on losing 3 ft or so to the overlap and a little more for the safe standing point below the top.

That is enough to reach the gutter line on many two-story homes and to work on a tall single-story roof edge. Measure from the ground to the point where the ladder rests against the wall, not to the roof peak.

If your eave sits at 18 ft or higher, step up to a 24 ft model like the Louisville 24 ft or the Little Giant HyperLite. The extra length costs more weight, but it clears the roof edge without a shaky top rung.

When a 16 foot ladder is enough

A 16 ft extension ladder fits single-story walls, sheds and garage roofs. DeWalt's 16-foot fiberglass model reaches about 13 ft of working height, which covers most one-story eaves and soffit work.

When you need a longer ladder

Go to a 24 ft ladder when your working height passes about 17 ft. Two-story roofs, tall garage walls and some loft conversions need that extra reach.

Our guide to the best ladders for high ceilings covers indoor versions of the same problem.

Which material suits a 20 foot extension ladder?

Fiberglass is the safer pick near wiring and in hot sun, while aluminum is the lighter, easier-to-carry choice for everyday home jobs. Both handle roof and gutter work well, so the deciding factor is usually electricity and weight.

Fiberglass does not conduct electricity, which is why Louisville and DeWalt build their Type IA extension ladders from it. Fiberglass also resists dents and does not heat up as fast in direct sun.

The downside is weight and, often, cost.

Aluminum is lighter and easier to move around the yard. It conducts electricity, so keep it away from power lines and live circuits.

Aluminum also dents more easily but usually costs less.

For a homeowner cleaning gutters near a service drop, fiberglass is the safer choice. For someone carrying a ladder up and down stairs often, the lighter aluminum multi-position models are easier on your back.

Fiberglass extension ladders

Louisville's 24 ft and 20 ft models, the DeWalt 16 ft and the Little Giant HyperLite all use fiberglass. They suit electrical, utility and repeated outdoor work where the extra weight is worth the stability and non-conductive rails.

Aluminum extension ladders

The Bryner, LEVELEVE, UC UP CLIMBER and Treemoo ladders are aluminum. They are lighter and easier to store, which makes them good choices for occasional use and for anyone who moves the ladder alone.

How do you set up a 20 foot extension ladder safely?

Set the base 1 ft out from the wall for every 4 ft of working height, lock both sections, and keep three rungs above the roof edge. Those three checks prevent most of the slips that turn a ladder job into an injury.

Start with the 4-to-1 rule. A ladder reaching 16 ft up needs its foot about 4 ft from the wall.

Little Giant points out that 1 inch off at the base can become a 9 inch lean at the top, so a bubble level or a careful eye at the base is worth the time.

Lock every rung or joint before you climb. On extension ladders, the MAXLOCK and QuickLatch systems secure the fly and base sections.

On telescoping and multi-position ladders, confirm each side lock clicks into place.

Keep the ladder on firm, level ground. Swivel safety shoes with spikes or treads help, and stabilizer bars widen the base on soft ground.

Never stand on the top three rungs, and keep your hips between the rails while you work.

Reaching a roof edge

Let the ladder extend about 3 ft above the roof edge so you have a handhold when you step off. Tie it off at the top when the wall allows, and check that both feet sit level before you climb.

Working near power lines

Keep every ladder, fiberglass or aluminum, at least 10 ft from overhead power lines. Fiberglass reduces the risk from a live circuit you touch, but it does not protect you from a line you lean into.

Are telescoping and multi-position ladders as safe as a fixed extension?

They are safe for their intended jobs when every lock is set, but they flex more and suit lighter, less frequent work than a fixed fiberglass extension ladder. Fixed rail ladders are the sturdier choice for repeated roof and gutter jobs.

A telescoping ladder like the UC UP CLIMBER or Treemoo stores in a tiny space and carries easily. Its sections slide inside each other, so the extended ladder has less stiffness than a rail ladder.

Check each rung lock as you raise it.

Multi-position ladders like the Soctone, Bryner and LEVELEVE add versatility. They change shape for stairs, A-frame work and scaffolds.

The cost is more joints and setup steps, plus more flex when fully extended.

If your main job is a two-story roof or a gutter run you repeat every season, buy a fixed fiberglass extension ladder. If storage or transport is the real limit, a telescoping or multi-position model covers occasional jobs safely when you set it up carefully.

Telescoping ladders for tight storage

The UC UP CLIMBER folds small enough for an RV bay and the Treemoo fits behind a door. Both carry easily.

Use them for roof hatches, lofts and camper roofs rather than all-day trade work.

Multi-position ladders for stairs and slopes

LEVELEVE's balance rods and eight support points handle steps and sloped ground. Bryner's seven configurations cover scaffold and wall-ladder use.

Soctone's stabilizer bars widen its base for outdoor jobs.

What else should you check before buying?

Check the rated load, the closed length against your storage space, and whether the ladder's working height matches your tallest job. Those three details decide whether the ladder you buy actually gets used.

Load rating matters more than most buyers expect. A 300 lb Type IA rating covers most adults plus tools.

A 330 or 350 lb rating gives extra headroom for gear and heavier users. Match the rating to who will climb and what they will carry.

Closed length decides storage. A 24 ft fiberglass extension ladder runs about 148 inches closed, so it needs a long wall, a garage ceiling rack or an outdoor bracket.

A folding or telescoping model solves that but trades some rigidity.

Check the top and feet too. A work tray or V-shaped top helps at a roof edge or pole.

Swivel safety shoes with spikes or treads keep the base planted. These small features make a difference on uneven ground.

Storage and transport

Measure your garage, shed or truck bed before you choose. A rail extension ladder needs a long, flat space.

A folding multi-purpose or telescoping ladder fits in a closet or trunk but takes longer to set up.

Load rating and duty type

Type IA covers 300 lb. A 330 lb rating appears on several multi-position and telescoping models here.

Buy above your weight and your tools, and never exceed the rated capacity with a person plus equipment.

Verdict: which 20 foot extension ladder should you buy?

Buy the Louisville 24 ft Fiberglass Extension Ladder if you want the best 20 foot extension ladder class for two-story roof and gutter work. Its 300 lb Type IA rating, non-conductive fiberglass rails and MAXLOCK locks make it the safest all-round pick for most homes.

Choose the Louisville Ladder 20 ft for eave-height gutter jobs where a work tray helps. Pick the Little Giant HyperLite 24' if you carry your ladder often and want less weight and flatter rungs.

Go with the DeWalt 16 ft for electrical and utility work on a single story.

If storage is the limit, the Bryner folding ladder or a telescoping model earns its place. For a look at the next size up, our roundup of aluminum extension ladders in 32 ft covers taller reach for commercial and three-story work.

Our top 3 picks at a glance

  1. 1 Louisville 24 ft Fiberglass Extension Ladder
    Best for two-story roof and gutter work

    Louisville 24 ft Fiberglass Extension Ladder

    9.7/10 our score

    See it on Amazon
  2. 2 Soctone Ladder
    Best for indoor and outdoor multi-position jobs

    Soctone Ladder

    9.7/10 our score

    See it on Amazon
  3. 3 DeWalt 16-foot Fiberglass Extension Ladder
    Best for electrical and utility jobs

    DeWalt 16-foot Fiberglass Extension Ladder

    9.6/10 our score

    See it on Amazon

Frequently asked questions

How tall should a 20 foot extension ladder be for a two-story house?

A ladder rated 20 ft reaches roughly 17 ft of working height once the overlap is set, so measure your eave height first. For a typical two-story roof edge near 18 to 20 ft, choose a 24 ft ladder such as the Louisville 24 ft fiberglass model.

What does the 4-to-1 rule mean for extension ladders?

The base goes out 1 ft for every 4 ft of working height. A ladder reaching 16 ft up needs its foot about 4 ft from the wall.

Check this before you climb, because a small base error grows into a large lean at the top.

Is fiberglass better than aluminum for a 20 foot extension ladder?

Fiberglass wins near wiring because it does not conduct electricity, and it holds up in sun and rain. Aluminum is lighter and often cheaper.

Pick fiberglass for electrical or utility work and aluminum when you carry the ladder often and store it indoors.

Can a telescoping ladder replace a 20 foot extension ladder?

Only for light, occasional jobs. Telescoping models store in a small space and carry easily, but they flex more than rail extension ladders.

Use a fiberglass or aluminum extension ladder for repeated roof, gutter or trade work at 20 ft.

How much weight should a 20 foot extension ladder hold?

Aim for a 300 lb rating for most home and trade work. That is the Type IA rating on the Louisville and DeWalt fiberglass models here.

A 330 lb rating gives extra headroom for tools and gear, as on the Bryner and LEVELEVE ladders.