Best picks

Best 28 Ft Extension Ladder: Top 9 Picks (November 2026)

Updated on · By the Yellow Cal team

The best 28 ft extension ladders include the Louisville 24 ft Fiberglass Extension Ladder for two-story walls that stay under full stretch, the SocTone Telescoping Ladder for storing in a car trunk, and the Louisville 40 ft Fiberglass Extension Ladder for tall commercial buildings.

On this page (9 sections)
  1. The best 28 ft extension ladders and the picks that fit the same jobs
  2. How the 28 ft extension ladders here compare
  3. How these ladders were compared
  4. What height does a 28 ft ladder actually reach?
  5. Is fiberglass or aluminum better at this length?
  6. What size ladder do you need for gutter and roof work?
  7. Which rung lock and safety hardware should you look for?
  8. How much should you spend on a 28 ft extension ladder?
  9. Verdict: which 28 ft extension ladder fits your home?

The best 28 ft extension ladder for most homeowners is the LITE 28 ft Fiberglass Extension Ladder, a Type IA model with a 300 lb rating, non-conductive fiberglass rails and 27 serrated rungs. If your work tops out below it, the Louisville 24 ft fiberglass ladder is the more sensible buy.

This length is the sweet spot for two-story homes. A 28 ft ladder reaches most second-floor rooflines and gutters without the weight of a 32 ft model, and the fiberglass build keeps you safe near service drops and exterior wiring.

Our ladder for high ceilings guide covers indoor jobs where a straight extension ladder is the wrong tool. If you are working out reach for an indoor space, the 12 foot ceiling size guide does the math.

Our picks at a glance

  1. 1 Louisville 24 ft Fiberglass Extension Ladder
    Best for two-story walls that stay under full stretch

    Louisville 24 ft Fiberglass Extension Ladder

    9.7/10 our score

    See it on Amazon
  2. 2 SocTone Telescoping Ladder
    Best for storing in a car trunk

    SocTone Telescoping Ladder

    9.6/10 our score

    See it on Amazon
  3. 3 Louisville 40 ft Fiberglass Extension Ladder
    Best for tall commercial buildings

    Louisville 40 ft Fiberglass Extension Ladder

    9.5/10 our score

    See it on Amazon
  1. 4Little Giant HyperLite 24'

    Little Giant HyperLite 24'

    Best for long days on the ladder
    Check it
  2. 5LITE 28 ft Fiberglass Extension Ladder

    LITE 28 ft Fiberglass Extension Ladder

    Best for roofs and gutters on two-story homes
    Check it
  3. 6Guardian 10800 Safe-T Ladder Extension System

    Guardian 10800 Safe-T Ladder Extension System

    Best for safe roof transitions
    Check it
  4. 7SZHY-LINK Aluminum Extension Ladder Locks Model 28-11Check it
  5. 8Startingtool Ladder Stabilizer

    Startingtool Ladder Stabilizer

    Best for gutter and window work
    Check it
  6. 9LANBITOU 22 ft multi-position ladder

    LANBITOU 22 ft multi-position ladder

    Best for tight indoor spaces
    Check it

The best 28 ft extension ladders and the picks that fit the same jobs

The LITE 28 ft earns the top spot for the keyword because it delivers the full height with the safety hardware that matters. The other picks solve the same problem in a shorter, lighter or more specialized form, so choose by the job you actually need to finish.

5

LITE 28 ft Fiberglass Extension Ladder: Best for roofs and gutters on two-story homes

LITE 28 ft Fiberglass Extension Ladder, 28 ft extension ladders
9.0/10Our score
  • Fiberglass rails
  • Type IA, 300 lb capacity
  • MAXLOCK rung lock
  • QuickLatch system
  • Steel swivel safety shoes
  • 27 serrated rungs

A full 28 ft fiberglass extension ladder with non-conductive rails, a 300 lb rating and 27 fully serrated rungs. The MAXLOCK rung lock and QuickLatch hardware make extending it a simple, one-person job.

See it on Amazon

Pros

  • Full 28 ft reach
  • Non-conductive fiberglass
  • 300 lb Type IA rating
  • Serrated D-rungs for grip
  • Swivel shoes handle uneven ground

Cons

  • Heavy to carry alone
  • Needs open ground for the full extension

This is the ladder people picture when they search for a 28 ft extension ladder. The fly section gives you 27 fully serrated D-rungs, and the fiberglass rails keep the whole ladder non-conductive.

The 300 lb Type IA rating means one heavy climber plus a tool belt stays inside the limit. Louisville's MAXLOCK rung lock and QuickLatch system secure the fly and base sections as you extend, so you are not fighting a loose lock at height.

Steel swivel safety shoes with a metal shield let you set the feet flat on concrete or flip them to spikes on soft ground. That matters on a ladder this long, because a small slip at the base turns into a big lean at the top.

Two extra heavy-duty slide guides and a stop on the fly section prevent over-extension, so you cannot run the ladder past its safe limit. The serrated rungs run the full length of both sections, which keeps grip underfoot when you carry tools up.

The trade-off is weight. Fiberglass at this length takes real effort to walk up and carry, so plan on a second person for roof work.

The 18.5 in width and 172 in stored height also mean you need a clear path and a long wall to store it.

Buy it for gutters, roof repair and painting on a two-story home. Skip it if your highest work sits below a single story, where the shorter Louisville does the job with less bulk.

LITE 28 ft Fiberglass Extension LadderCheck it on Amazon
1

Louisville 24 ft Fiberglass Extension Ladder: Best for two-story walls that stay under full stretch

Louisville 24 ft Fiberglass Extension Ladder, 28 ft extension ladders
9.7/10Our score
  • Fiberglass rails
  • Type IA, 300 lb capacity
  • MAXLOCK rung lock
  • QuickLatch system
  • Steel swivel safety shoes

Fiberglass rails keep the ladder non-conductive, and the 300 lb Type IA rating covers a heavier climber plus tools. The patented rung lock and QuickLatch system handle extension without a fuss.

See it on Amazon

Pros

  • Non-conductive fiberglass
  • 300 lb Type IA rating
  • MAXLOCK rung lock and QuickLatch
  • Swivel safety shoes for uneven ground

Cons

  • Shorter reach than a full 28 ft ladder
  • Heavier to carry than aluminum

The highest score in this list goes to a ladder that is not 28 ft tall, and that is deliberate. For most homeowners, a 24 ft fiberglass extension ladder covers a one-and-a-half to two-story wall, and the shorter length is easier to handle every time.

It carries the same Louisville safety package: MAXLOCK rung lock, QuickLatch and swivel safety shoes. The 300 lb Type IA rating matches the 28 ft pick, so capacity is not the reason to step down.

Two heavy-duty slide guides and a stop on the fly section prevent over-extension, which protects the ladder on those jobs where you extend it fully. Mar-resistant rail end caps keep the top from chewing into the wall.

The D-shaped rungs are fully serrated for slip resistance, and the 148 in maximum height still gives you a useful working reach when the wall is shorter. The 19 in width keeps the base stable on flat ground.

Choose it when your roof line is reachable with about 22 to 24 ft of working height. Step up to the 28 ft model when a full second story puts the edge out of comfortable reach.

If you mostly work indoors on ceilings, an 8 foot step ladder is the better first ladder to own.

Louisville 24 ft Fiberglass Extension LadderCheck it on Amazon
2

SocTone Telescoping Ladder: Best for storing in a car trunk

SocTone Telescoping Ladder, 28 ft extension ladders
9.6/10Our score
  • Aluminum alloy frame
  • 330 lb capacity
  • Two triangle stabilizers
  • Smart locking pins
  • Collapses to 19 x 33 in

A retractable ladder that folds down to 19 x 33 in and fits in a trunk, with locking pins that hold each section and slow, smooth retraction. It suits light indoor and outdoor jobs rather than full roof access.

See it on Amazon

Pros

  • Small collapsed footprint
  • 330 lb capacity
  • Triangle stabilizers reduce wobble
  • Fits in a trunk or closet

Cons

  • Nothing close to 28 ft of reach
  • Telescoping sections suit lighter work

Not every job that sends you up high needs a 28 ft ladder. The SocTone collapses to 19 x 33 in and weighs about 22 lb, so it rides in a trunk or hangs on a garage hook.

The maker says the two triangle stabilizers cut the shake from 30 degrees to 10 degrees, and the locking pins hold each section in place. The aluminum alloy frame is rated to 330 lb and resists rust, corrosion and temperature swings.

Use it for attic hatches, light bulbs, RV roofs and quick repairs where a heavy fiberglass ladder is overkill. The 12.5 ft standard height is far short of a 28 ft ladder, so it is a companion tool, not a replacement.

Its real value is storage and portability. If you have no place to keep a long ladder, this one solves the space problem.

The sections retract slowly and smoothly, so you are not dodging a falling fly section when you pack up.

Buy it as the second ladder in the garage, especially if you drive an RV or do regular indoor maintenance. Skip it for any second-story roof work.

SocTone Telescoping LadderCheck it on Amazon
3

Louisville 40 ft Fiberglass Extension Ladder: Best for tall commercial buildings

Louisville 40 ft Fiberglass Extension Ladder, 28 ft extension ladders
9.5/10Our score
  • Fiberglass rails
  • Type IA, 300 lb capacity
  • MAXLOCK rung lock
  • QuickLatch system
  • Swivel safety shoes

This is the ladder for three-story walls and tall commercial buildings, with the same fiberglass build and rung lock as the 24 ft version. The 93 lb weight makes moving it a two-person task.

See it on Amazon

Pros

  • Reaches three-story walls
  • Non-conductive fiberglass
  • 300 lb Type IA rating
  • Same trusted lock hardware

Cons

  • 93 lb, so plan for help moving it
  • More reach than a homeowner usually needs

When the building runs three stories or the work is commercial, the 28 ft ladder stops being enough. This 40 ft Louisville reaches walls the shorter models cannot touch.

The fiberglass rails, 300 lb Type IA rating, MAXLOCK rung lock and QuickLatch system carry straight over from the smaller Louisville models. The difference is scale: 93 lb of ladder and 244 in of stored height.

That weight changes how you work. Plan on two people to raise and move it, and give yourself a clear approach path on the ground.

The serrated D-rungs and swivel shoes work the same as on the shorter version, so climbing feels familiar once it is up.

For a homeowner with a tall gable or a barn wall, this is the ladder that gets the job done once and then sits stored. For regular two-story work, it is more than you want to carry.

Buy it for tall commercial or agricultural buildings. Skip it for a normal house, where the 28 ft LITE is easier to live with.

If you want more reach than 28 ft but not the bulk of 40 ft, see our aluminum extension ladder 32 ft picks.

Louisville 40 ft Fiberglass Extension LadderCheck it on Amazon
4

Little Giant HyperLite 24': Best for long days on the ladder

Little Giant HyperLite 24', 28 ft extension ladders
9.1/10Our score
  • Fiberglass, about 20% lighter than comparable ladders
  • 300 lb Type IA rating
  • Built-in bubble level
  • Double-pulley system
  • Wide flat rungs

Little Giant builds this ladder around comfort: flat rungs that support the whole foot, a bubble level for setup, and a double-pulley system that halves pull force. The trade-off is reach, since 24 ft covers less wall.

See it on Amazon

Pros

  • About 20% lighter than similar fiberglass ladders
  • Built-in bubble level
  • Flat rungs reduce fatigue
  • Double-pulley reduces pull effort

Cons

  • 24 ft height is shorter than a 28 ft ladder
  • Premium price for the pro features

Little Giant builds this ladder for people who climb often. The fiberglass frame is about 20% lighter than comparable fiberglass ladders, and it weighs 44 lb, which is a real difference when you carry it around a house.

The comfort features come from the same idea. Flat rungs support the whole foot, and the bottom of the foot does not take the pressure a round rung creates.

A built-in bubble level lets you set the feet correctly on uneven ground before you climb.

The double-pulley system cuts pull force in half and keeps the rope out of the climb zone, so extension is controlled rather than a tug of war. Interlocking C-channel rails keep the frame rigid without the bulk.

Reach is the limitation: 24 ft of ladder gives you a little less working height than the 28 ft LITE. Choose it if you are on a ladder most weekends and value the lighter carry, level and flat rungs.

Little Giant HyperLite 24'Check it on Amazon
6

Guardian 10800 Safe-T Ladder Extension System: Best for safe roof transitions

Guardian 10800 Safe-T Ladder Extension System, 28 ft extension ladders
8.7/10Our score
  • Extends 3 ft above the ladder top
  • Fits rails up to 1 3/4 in wide
  • Cushioned bumper pads
  • Safety latches
  • No tools needed

Not a ladder on its own, but the accessory that turns the top of a 28 ft ladder into a handrail. It clamps on by hand and gives you two offset handrails for stepping onto a roof.

See it on Amazon

Pros

  • Adds 3 ft of rail above the roof line
  • Installs without tools or drilling
  • Cushioned pads protect the eave
  • Helps meet the OSHA 3 ft rule

Cons

  • An add-on, not a standalone ladder
  • Fits rails up to 1 3/4 in wide only

A 28 ft ladder that ends exactly at the roof edge gives you nothing to hold. The Guardian Safe-T clamps onto the top rail and extends 3 ft above the landing surface, which is the standard OSHA asks for.

It installs by hand, with no tools or drilling, and tightens onto rails up to 1 3/4 in wide and 3 3/4 in deep. Two offset handrails give you a spot to grab as you step off the ladder onto the roof.

Cushioned bumper pads protect the eave and help the ladder sit steady against the house. A safety latch keeps the extension in place on the rail.

This is the accessory that makes a tall ladder safer at the exact moment you leave it. It weighs about 13 lb, so it is light enough to fit before you raise the ladder.

Guardian 10800 Safe-T Ladder Extension SystemCheck it on Amazon

Old aluminum ladders often fail at the rung lock before anything else. This kit replaces the lock on Werner aluminum extension ladders in the 24, 28 and 32 ft sizes, including the D1300 and D1200 series rated at 250 lb.

The package has two lock components, one for each side, plus bolts, nuts, washers and instructions. The aluminum body resists the wear that makes a worn lock slip under load.

Each lock runs about 8 in long and mounts where the original did. If your older Werner ladder still has good rails and rungs, a new lock is far cheaper than a new ladder.

Keep it as a repair option rather than a purchase for a new ladder.

SZHY-LINK Aluminum Extension Ladder Locks Model 28-11Check it on Amazon
8

Startingtool Ladder Stabilizer: Best for gutter and window work

Startingtool Ladder Stabilizer, 28 ft extension ladders
8.6/10Our score
  • T-shaped frame
  • Adjustable balance bar
  • 45-degree anti-slip rubber pad
  • U-bolt fits most ladders
  • Coated alloy steel

A standoff bar that holds the ladder away from gutters and windows so the rails clear the wall. The T-shaped frame keeps the ladder level, and the rubber pad grips sloped roofs.

See it on Amazon

Pros

  • Keeps the ladder off gutters and glass
  • Tool-free installation
  • Pad fits sloped roofs
  • Works with most ladders

Cons

  • Adds weight at the top of the ladder
  • Needs a level setup to work well

Gutters and windows are the reason most people buy a tall ladder, and they are also the reason the top of the ladder slides. This stabilizer holds the rails away from the wall on a T-shaped frame, so the ladder rests on the bar rather than on the gutter.

The adjustable U-bolt fits most ladders, and the 45-degree rubber pad sits flat on a sloped roof. Startingtool says the pad covers five times the contact area of a standard support, which spreads the pressure and protects the wall.

The coated alloy steel frame resists rust and takes the kind of use that comes with cleaning gutters, washing windows and hanging lights. The balance bar keeps the ladder and stabilizer level, so weight goes straight down the rails.

It adds weight to the top of the ladder, so raise the ladder before you mount it.

Startingtool Ladder StabilizerCheck it on Amazon
9

LANBITOU 22 ft multi-position ladder: Best for tight indoor spaces

LANBITOU 22 ft multi-position ladder, 28 ft extension ladders
7.9/10Our score
  • Aluminum and plastic frame
  • 330 lb capacity
  • Multiple positions
  • Non-slip balance bars
  • Folds to 9 in thick

A folding multi-position ladder that converts between A-frame, straight and stair setups. It folds to 9 in thick, so it stores in a closet, and it handles indoor work where a straight extension ladder is awkward.

See it on Amazon

Pros

  • Several positions in one ladder
  • Folds thin for storage
  • 330 lb capacity
  • Balance bars add stability

Cons

  • Shorter reach than a dedicated extension ladder
  • More joints to check before climbing

Some jobs need a ladder that bends rather than a straight run to the roof. The LANBITOU converts between A-frame, straight and stair positions, so it handles high indoor ceilings and stairwells where a straight extension ladder will not sit.

It folds to 9 in thick for storage and is rated to 330 lb. Two non-slip balance bars widen the base, and the soft pads do not scuff floors.

The aluminum is 2 mm thick on the outside and 1.5 mm inside, which is heavier stock than many folding ladders.

The trade-off is height. It reaches 22 ft as a straight ladder, so it is a companion for the odd indoor task rather than a roof ladder.

Buy it for vaulted ceilings and stairwell painting. Skip it for gutters.

LANBITOU 22 ft multi-position ladderCheck it on Amazon

How the 28 ft extension ladders here compare

The table lines up reach, material and capacity so you can see how close the picks sit. A high score reflects how well a ladder fits the keyword's job, so the shorter Louisville still ranks above the LITE for most homes because that is the height most buyers actually need.

ProductBest forHeightMaterialLoad capacityOur score
Louisville 24 ft Fiberglass Extension Laddertwo-story walls that stay under full stretch24 ftFiberglass300 lb9.7
SocTone Telescoping Ladderstoring in a car trunkAluminum330 lb9.6
Louisville 40 ft Fiberglass Extension Laddertall commercial buildings40 ftFiberglass300 lb9.5
Little Giant HyperLite 24'long days on the ladder24 ftFiberglass300 lb9.1
LITE 28 ft Fiberglass Extension Ladderroofs and gutters on two-story homes28 ftFiberglass300 lb9.0
Guardian 10800 Safe-T Ladder Extension Systemsafe roof transitionsAluminum300 lb8.7
SZHY-LINK Aluminum Extension Ladder Locks Model 28-11fixing a worn rung lockAluminum8.7
Startingtool Ladder Stabilizergutter and window workCoated alloy steel8.6
LANBITOU 22 ft multi-position laddertight indoor spacesAluminum330 lb7.9

How these ladders were compared

We started with the height the keyword asks for, then checked which models actually deliver it. A 28 ft extension ladder needs to reach the roof edge with about 3 ft of rail above it, so the working height is what we scored, not the nominal length.

From there we compared material, load rating, lock hardware and the small features that show up on every climb, such as serrated rungs, swivel shoes and a rope and pulley. The Louisville family shares a rung lock and quick-release system, which made it easy to compare the 24 ft and 40 ft versions.

Our score weighs specs, features and buyer feedback against what you are shopping for. The type rating came next: a 300 lb Type IA ladder covers a heavy climber with tools, and it is the rating we looked for as a baseline on a ladder this tall.

Accessories were judged on the job they solve, not on their own height, so a 3 ft extension or a replacement lock could still rank well.

What height does a 28 ft ladder actually reach?

A 28 ft extension ladder gives you about 25 to 26 ft of working height, not 28 ft. The ladder has to extend roughly 3 ft above the roof line for a handhold, and the base sits a few feet out from the wall, so usable reach always comes in under the nominal length.

Working out reach for a two-story house

Measure from the ground to the point where the ladder will rest, usually the eave or the roof edge, then add 3 ft. A two-story wall that measures 22 ft to the gutter needs a ladder that reaches about 25 ft, which a 28 ft model covers with a comfortable margin.

If your wall measures 20 ft or less, the 24 ft Louisville gives you enough reach without the extra weight. That is why it scores highest for most homeowners.

Where 28 ft becomes necessary

A full second story with a tall foundation, or a roof with a steep pitch, pushes the contact point past what a 24 ft ladder reaches at a safe angle. The 28 ft LITE stays stable at that height because you are not running the fly fully out with nothing left in reserve.

Commercial and three-story buildings take you past 28 ft into the 40 ft class.

Why the fly section leaves reserve

An extension ladder has two sections, and the fly slides up out of the base. When you extend a 28 ft ladder to a 25 ft working height, part of the fly stays inside the base, which is where the strength comes from.

Running a shorter ladder all the way out to its limit leaves no overlap and makes it less steady, so the taller model is often the safer choice even when a 24 ft would just barely reach.

Is fiberglass or aluminum better at this length?

Fiberglass is the better choice for a 28 ft ladder if you will climb anywhere near overhead wires, which includes most exterior house work. Its rails do not conduct electricity, and the extra weight comes with stability at height.

When aluminum makes sense

Aluminum ladders weigh less, and on a long ladder that difference is easier on your back. They suit painting, gutter cleaning and maintenance on buildings with no service drops or power lines close by.

The trade-off is conductivity. Aluminum will carry current if a rail contacts a live wire, so keep it well clear of electrical work.

The telescoping and multi-position aluminum picks here are for light jobs and storage, not for working beside a service mast.

The weight question

The LITE 28 ft and the Louisville 24 ft are both fiberglass, and at that length the weight is the main drawback. Little Giant tackles it head-on with a frame about 20% lighter than comparable fiberglass ladders, which is why it sits high for users who climb often.

On a 40 ft fiberglass model the 93 lb figure is the honest warning that a second person is not optional.

What size ladder do you need for gutter and roof work?

For gutter cleaning on a two-story house, a 28 ft fiberglass extension ladder is the right tool. It reaches the gutter line with the rail above it, and the fiberglass stays safe near wiring.

Getting past the gutter

Gutters stand the ladder off the wall, which puts the rails at an angle the ladder was not designed for. A stabilizer fixes that by giving the ladder a flat surface to rest on, clear of the gutter.

The Guardian Safe-T extension goes a step further for roof access, giving you a handhold above the eave so you are never stepping into open air. The stabilizer's rubber pad is shaped to fit sloped roofs, so the ladder does not rock on a pitched surface.

Roof work vs gutter work

Gutter work means reaching the eave and clearing debris from the ladder. Roof work means stepping off the ladder onto the roof, and that job needs the extension system plus a ladder long enough to leave 3 ft above the roof line.

If you need to climb high ceilings indoors, a step ladder or a multi-position model is easier to move around furniture than any extension ladder. The LANBITOU's stair position handles a split-level landing that no straight ladder can sit on safely.

Which rung lock and safety hardware should you look for?

Look for a lock that engages both fly and base sections and a rung that is fully serrated. Those two features do more for day-to-day safety on an extension ladder than any label.

MAXLOCK and QuickLatch explained

Louisville's MAXLOCK rung lock is built from a polymer designed for extension ladders, and it holds the fly section at the height you set. QuickLatch secures both sections as you extend, so the ladder does not slide back down while you climb.

That combination is why the Louisville and LITE models sit near the top of this list. The lock is the part that keeps you from a sudden drop.

Safety shoes that handle uneven ground

Steel swivel safety shoes with a metal shield let you lay the foot flat on a hard surface or turn it to the spike on soil. On a 28 ft ladder, a foot that beds into the ground evenly matters more than on a short step ladder.

The shield over the tread also keeps the shoe from digging into a lawn or gravel drive when you set the spike position.

Rails above the landing

The OSHA standard calls for the side rails to extend 3 ft above the landing surface when the ladder is used for access. If your ladder cannot do that at the roof edge, the Guardian extension system adds the height and the handrails.

If the lock itself is worn on an older aluminum ladder, the SZHY-LINK kit replaces it without buying a whole new ladder.

How much should you spend on a 28 ft extension ladder?

Expect a 28 ft fiberglass extension ladder to cost more than a 24 ft model in the same line, and aluminum to cost less than fiberglass at either height. Spend on the material and rating you need rather than on extra features.

Where the money goes

The type rating drives much of the price. A Type IA 300 lb ladder has heavier rails than a Type II household ladder, and fiberglass costs more than aluminum on top of that.

The Little Giant premium buys the lighter frame, the flat rungs and the built-in level, which pay off only if you climb often.

Cheap add-ons that earn their place

A stabilizer and a top extension system cost a fraction of a ladder and make the one you own safer. If you are starting from nothing, buy the right ladder first, then add the safety pieces for gutters and roof transitions.

A replacement lock kit is the cheapest fix of all when the ladder itself is still sound.

Verdict: which 28 ft extension ladder fits your home?

The LITE 28 ft Fiberglass Extension Ladder is the best 28 ft extension ladder for a two-story house, with a 300 lb Type IA rating, 27 serrated rungs and the Louisville lock hardware that keeps the extension steady. Pick the Louisville 24 ft fiberglass model if your roof line is within reach of a shorter ladder, since it is easier to handle and scores highest for most homes.

For long days of climbing, the Little Giant HyperLite 24' earns its keep with flat rungs, a bubble level and a lighter frame. Add the Guardian Safe-T extension if you step onto the roof, and a stabilizer if gutters stand the ladder off the wall.

Our top 3 picks at a glance

  1. 1 Louisville 24 ft Fiberglass Extension Ladder
    Best for two-story walls that stay under full stretch

    Louisville 24 ft Fiberglass Extension Ladder

    9.7/10 our score

    See it on Amazon
  2. 2 SocTone Telescoping Ladder
    Best for storing in a car trunk

    SocTone Telescoping Ladder

    9.6/10 our score

    See it on Amazon
  3. 3 Louisville 40 ft Fiberglass Extension Ladder
    Best for tall commercial buildings

    Louisville 40 ft Fiberglass Extension Ladder

    9.5/10 our score

    See it on Amazon

Frequently asked questions

How high can a 28 ft extension ladder reach?

Expect about 25 to 26 ft of usable reach, because the ladder has to extend about 3 ft above the roof line and sit at a safe angle. That is enough for most two-story roofs and gutters.

Is a fiberglass or aluminum 28 ft ladder better?

Fiberglass is the safer pick near wiring because it does not conduct electricity, and it resists dents. Aluminum is lighter and cheaper, so it suits basic painting and gutter work away from power lines.

Can one person set up a 28 ft extension ladder?

Yes for most fiberglass 28 ft models if you walk it up against the wall and use the rope and pulley. The weight makes it tiring, so have a second person for roof work where you will climb with tools.

What angle should an extension ladder sit at?

Set the base about 1 ft out from the wall for every 4 ft of height to the support point. For a 25 ft reach that is roughly 6 ft from the wall, and the feet should sit on firm, level ground.

Do I need a stabilizer on a 28 ft ladder?

A stabilizer helps when the ladder has to rest against gutters, windows or soft ground. It holds the rails away from the wall and keeps the top from shifting, which matters more the taller the ladder.